AL101510 Flanged Metric Oilite Bearing

Model:  AL101510
Brand:  Oilite
Metric / Imperial:  Metric (mm)
Internal Diameter:  10mm
Outside Diameter:  15mm
Length:  10mm
Flange Outside Diameter:  21mm
Flange Thickness:  3mm
ID tolerance:  Min: 10.005mm Max: 10.02mm (G7)
OD tolerance:  Min: 15.028mm Max: 15.046mm (s7)
Length tolerance:  Min: 9.89mm Max: 10.11mm (js13)
Flange OD tolerance:  Min: 20.835mm Max: 21.165mm (js13)
Flange thickness tolerance:  Min: 2.93mm Max: 3.07mm (js13)
Recommended shaft tolerance:  Min: 9.972mm Max: 9.987mm (f7)
Recommended housing tolerance:  Min: 15mm Max: 15.018mm (H7)
ID when fitted:  Min: 10mm Max: 10.015mm (H7)
Recommended fitting pin tolerance:  Min: 10.006mm Max: 10.012mm (m5)

Alternative or equivalent part numbers: AL1015-10, AMF101510, QFM11-10, FCM32x10, 10/15x10-21x3

Standard Oilite(tm) Material is made from Oil impregnated sintered bronze.

The chemical composition for standard Oilite material is within the following:

Copper: Balance

Iron: 1% Max

Carbon: 3% Max

Tin: 9-11%

Max. Other Elements. 2%

Open Porosity Minimum: 20-27%

Minimum Oil Content: 18-24%

Minimum Radial Crushing Strength K: 120-180 N/mm²

Nominal Density: 6-7g/cc

Maximum static load: 35-65 N/mm²

Maximum dynamic load: 10-18 N/mm²

Maximum velocity: 5-6 m/s

Maximum PV factor*: 1.8

*PV factor = Pressure (N/mm²) x bearing surface velocity (m/s).

Pressure is calculated as load (N) / Projected area (internal diameter x Length) (mm)

There are several more specific specs for specific parts which fall within the above specification. please

contact us for more details if required.

Oilite® is a USA, UK & EU Registered Trademark